9-6
SECTION 9 –
MISCELLANEOUS
Connecting the Boom
1. Square up to the boom.
2. Disengage the Quick-Tach Lock Assem-
blies by pulling the Lock Pins (located on
the front left and right-hand side of
machine) OUT as far as it will go until it
is in the “lock-out” position.
NOTE: “Lock-out” position prevents re-
locking while attaching or detaching
the attachment.
3. Slowly pull into the attachment.
4. Ensure the Attachment Hooks are high
enough to clear the Mounting Pins.
5. If necessary, lower the machine by rotat-
ing the corresponding Air Suspension
Valves (located on the left-hand front air
bag) in the COUNTER-CLOCKWISE
(Deflate) position.
WARNING
Turn the engine OFF before connecting/
disconnecting any hoses or electrical
lines. Failure to comply may result in
serious injury or death.
Lock Pin
(Located on the front left and
right-hand side of machine)
-Typical View
* Disengaged position shown
Attachment Clearing Mounting Pin
-Typical View
Summary of Contents for STS 10
Page 290: ......
