9-14
SECTION 9 –
MISCELLANEOUS
18. If the air bags were previously deflated,
raise the machine by rotating the corre-
sponding Air Suspension Valves in the
CLOCKWISE (Inflate) position.
Boom Stands
90/100’ Spray Booms
Your boom is featured with three boom
stands - two (2) located on the transom and
one (1) located on each of the inner boom
sections.
Each boom stand has a leg with a “foot”
on the bottom and a hex bolt in the top hole
of the leg to secure it from sliding off, as well
as a “snap” lock pin in the hole (located
directly below the bracket) to maintain it’s
position.
120/132’ Spray Booms
Your boom is featured with two (2) boom
stands (located on the transom).
To Extend Booms Stands:
1. Remove Lock Pin (located on the outer
side of transom frame) and set aside.
Booms Stands
(90’ Boom)
-Typical View
Boom Stand Assembly
-Typical View
Booms Stands
(120/132’ Boom)
-Typical View
Lock Pin
(Located on the outer
side of transom frame)
-Typical View
Summary of Contents for STS 10
Page 290: ......
