8-21
SECTION 8 –
MAINTENANCE AND STORAGE
6. Remove the Filter Bracket (located along
the right-hand side of charcoal filter) and
set aside.
7. Remove Charcoal Filter.
8. Replace Charcoal Filter and reverse
steps to reinstall.
Recirculation Filter
A Recirculation Filter is located along the
right-hand side of compartment (accessible
after the Charcoal Filter has been removed).
Remove the Recirculation Filter and clean
with soap and warm water (wring out gently)
anytime that the Charcoal Filter is replaced.
SERVICE - LUBRICATION
Legs and Steering
Grease Zerk Bank
-If Equipped
Your machine may be equipped with
Grease Zerk Banks* (located on the front
side of each leg) to lubricate the leg and
steering grease zerks from one convenient
location.
•
Remove cap from the bottom of the cor-
responding grease zerk port and apply
grease as required.
Filter Bracket
(Located along the right-hand
side of charcoal filter)
-Typical View
Charcoal Filter
-Typical View
NOTICE
Failure to properly lubricate pivot and
friction points may result in unnecessary
wear and damage.
NOTICE
Mobilgrease XHP
™
222 (complying with
NLGI 2, EP, ISO 220 specifications)
recommended.
Recirculation Filter
(Located along the right-hand
side of compartment)
-Typical View
Summary of Contents for STS 10
Page 290: ......
