3-67
SECTION 3 –
CAB
or priming is active, to navigate to the
“Air Purge/Priming Selection” screen.
NOTE: The Air Purge/Priming Shortcut
Button will only appear if the Show
Shortcuts feature is enabled (Main
Menu>Preferences>Show
Shortcuts).
NOTE: If air purge or priming is active, a
progress bar will fill around the
button itself to display current system
status. Orange is the amount of cycle
time that is complete. Pressing the
button when air purge or priming is
active will navigate to the function
that is active.
Solution System
The “Solution System Schematic” screen
allows the operator to view current solution
system status.
•
Press the Solution System Button to
navigate to the “Solution System Sche-
matic” screen.
NOTE: Circles with lines through them are
solution valves. When green, the
valve is activated. If gray with
perpendicular line, the valve is off.
NOTE: When the Fence Row and Boom
Solution Valves (located at the
bottom of schematic) are green, the
corresponding valve is activated and
spraying.
System Faults
The “System Faults” screen displays
various machine faults, such as:
• Primary
Air Purge/Priming Shortcut Button
(Located on the Home Page -
Road or Field Mode)
Solution System Button
(Located on the Main Menu Page)
Solution System Schematic Screen
• Rinse
Tank
• Solution
Tank
• Solution Tank
Valve ON
• Right
Fence
Row
• Solution
Pump/
Command
• Agitation
Circuit
• Rinse Main
Tank Circuit
• Flow
Meter
• Rear Tire
Track
Nozzle
• Left
Fence
Row
• Boom Solution
Valves
(Sections 1-9)
Summary of Contents for STS/DPS Series
