4-15
SECTION 4 –
ENGINE AND DRIVE SYSTEMS
To Disengage the Parking Brake
NOTE: If the Hydrostatic Drive Control
Handle is out of neutral while the
parking brake is engaged, a warning
message will appear on the Machine
Display stating, “Parking Brake on
with control handle out of neutral.
Return control handle to neutral and
toggle Parking Brake Switch to
release.” Press OK to acknowledge.
•
To disengage the Parking Brake and
raise the Ladder
, press the Parking
Brake Switch in the DOWN (Off) posi-
tion.
Deceleration (Decel) Pedal
When nearing an end row and speed
deceleration is desired, press the Decel
Pedal (located on the lower right-hand side of
the steering column) to decrease speed.
Setting Decel Pedal Minimum Speed
Refer to “Machine Display” provided in the
Cab Section
elsewhere in this manual for
further information.
Target Speed
The Target Speed (displayed on the
Machine Display Home Page - Road and
Field Mode) is the speed in which the
machine travels when the Hydrostatic Drive
Control Handle is in the fully FORWARD
position and the Decel Pedal is NOT
pressed.
NOTE: The Target Speed displayed is the
maximum speed for the selected
speed range.
Parking Brake Indicator
(Located on the top left-hand
side of each Machine Display page)
Parking Brake Warning
WARNING
Decel Pedal is NOT a brake. It is
designated for speed reduction only.
Decel Pedal
(Located on the lower right-hand
side of the steering column)
-Typical View
Summary of Contents for STS/DPS Series
