SECTION 7 –
SPRAY SYSTEMS
7-17
2. On the “Boom State” screen, swipe the
Manual/Auto Mode slide bar to MAN-
UAL.
NOTE: When Manual Mode is activated,
Fold Extensions will be disabled.
3. Press and hold the corresponding Left
and Right-Hand Boom Switches (located
on the Hydrostatic Drive Control Handle)
in the UP position to raise the level cylin-
ders all the way up.
4. Press and hold the Left and Right-Hand
Boom Switches in the OUT position to
unfold the main boom sections until they
come to a complete stop.
NOTE: Unfold booms simultaneously to
prevent weight imbalance.
5. Lower the level cylinders until the boom
is parallel with the ground.
6. Press and hold the Left and Right Boom
Extension Switches (located on the side
console) in the UP position to unfold the
boom extensions all the way OUT.
Attachment Button
(Located on the Machine Display
Main Menu Page)
Manual/Auto Mode
(Located on the Boom State Screen)
Left and Right-Hand Boom Switches
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
• Right
Boom
OUT
• Right
Boom
DOWN
• Right
Boom
UP
• Right
Boom
IN
• Left
Boom
UP
• Left
Boom
OUT
• Left
Boom
IN
• Left
Boom
DOWN
Summary of Contents for STS/DPS Series
