SECTION 10 –
MISCELLANEOUS
10-10
Quick Connect Multi-Coupler
(Standard)
• Install the Hydraulic/Electrical Connections
(located on the left-hand side of attachment) into
the Multi-Coupler Receptacle (located on front
left-hand side of machine), ensuring full
engagement.
• Push the Quick Connect Handle (located on the
Hydraulic/Electric Multi-Coupler Assembly)
OUT to engage hydraulic/electrical
connections.
Quick Connect Multi-Coupler
(120’ Hybrid Spray Booms)
-If Equipped
• Remove Hydraulic/Electric Multi-Coupler (A)
from the Multi-Coupler Storage Receptacle (B)
(located on the left-hand boom lift arm) and
install on the front left-hand side of machine (as
shown).
• Install the Hydraulic/Electrical Connections
(located on the left-hand side of attachment) into
the Multi-Coupler Receptacle (located on front
left-hand side of machine), ensuring full
engagement.
• Push the Quick Connect Handle (located on the
Hydraulic/Electric Multi-Coupler Assembly)
OUT to engage hydraulic/electrical
connections.
Hydraulic/Electric Multi-Coupler Assembly
(Located on the front
left-hand side of machine)
• Quick
Connect
Handle
Multi-Coupler Storage Assembly
(Located on the left-hand boom lift arm)
-Typical View
* 120’ Hybrid Booms only
A
B
Summary of Contents for STS/DPS Series
