3-47
SECTION 3 –
CAB
In addition to the boom charge warning
message, a boom charge indicator will
illuminate along the top of any given display
page.
Refer to “Spray Booms - 120-ft. Hybrid’”
provided in the
Spray Systems Section
elsewhere in this manual for further
information.
Nitrogen Tool Bar (30/40’ NTB)
-If Equipped
Float
The Float Button (located on the “NTB
Adjustments” screen) enables Float
operation when activated.
•
Press the Attachment Button (located on
the Main Menu Page) to navigate to the
“NTB Adjustments” screen.
•
Press the Float Button (located on the
“NTB Adjustments” screen) to turn Float
ON. Press button again to turn Float
OFF.
NOTE: The Float Button will illuminate when
in the ON position.
NTB Adjustments
NTB Override Timer
The NTB Override Timer controls how
long the outer sections raise with the transom
during Float operation.
•
On the “NTB Adjustments” screen, use
the slide bar (next to NTB Override
Timer) to adjust desired value (ranging
from 0.1 to 10 seconds).
NOTE: Slide right to increase value, or left to
decrease value.
Boom Charge Warning - 120’ Hybrid Booms
Boom Charge Indicator - 120’ Hybrid Booms
(Located along the top of each display page)
Attachment Button
(Located on the Main Menu Page)
Float Button
(Located on the NTB Adjustments Screen)
Summary of Contents for STS/DPS Series
