7-30
SECTION 7 –
SPRAY SYSTEMS
Pressure Gauge
The Pressure Gauge (mounted on the
boom) gives a constant visual display of
solution pressure being applied (measured in
PSI).
NOTE: Pressure will vary according to
speed, application, rate, tip size, etc.
Solution Tank Drain Valve
The Solution Tank Drain Valve (located
beneath the solution tank on underside of
machine) is used to drain small volumes of
residual from the solution tank.
Refer to “Draining Your Solution Tank”
elsewhere in this section for further
information.
Solution Tank Valve (Main Tank)
The Solution Tank Valve (located beneath
the solution tank on underside of machine) is
an electric tank shut-off valve. This valve is
controlled by the Main Tank Valve Switch
(located on the side console).
Main Tank Valve Switch
The Main Tank Valve Switch (located on
the side console) controls the Solution Tank
Valve.
Flow Meter
(Located beneath the
right-hand side of machine)
-Typical View
Pressure Gauge
(Mounted on boom)
-Typical View
Solution Tank Drain Valve
(Located beneath the solution
tank on underside of machine)
-Typical View
Solution Tank Valve
(Located beneath the solution
tank on underside of machine)
-Typical View
Summary of Contents for STS12i Combo
Page 276: ......