9-18
SECTION 9 –
MISCELLANEOUS
3. With the boom stand at desired position,
reinstall the Mounting Bolt, ensuring the
holes of the boom stand and transom
frame are properly aligned.
4. Reinstall Lock Pin (that was previously
removed in Step 1).
5. Repeat Steps 1-4 on opposite side of
boom.
NOTE: For additional adjustment, the
“foot” end of the boom stand may
also be adjusted to best suit your
situation (e.g. boom height, ground
level, etc.) Adjust in the same manner
as previously described.
6. Reverse steps to store booms stands in
“travel” position.
AIR SUSPENSION EXHAUST
(Air Bags)
The Air Suspension Exhaust System is
used to manually inflate/deflate the air bags
on your machine, providing you with a
smooth, consistent ride quality. It also
provides ease when connecting and
disconnecting attachments.
NOTE: Inspect air bags daily for leaks and/
or cracking.
To Inflate/Deflate the Air Bags
•
Rotate the corresponding Air Suspension
Valves (located on the left-hand front and
rear air bags) in the COUNTER-
CLOCKWISE position to deflate.
•
Rotate the corresponding Air Suspension
Valves in the CLOCKWISE position to
inflate.
Mounting Bolt
(Located on the outer
side of transom frame)
-Typical View
Boom Stand
(Extended position shown)
-Typical View
• Mounting
Bolt
Air Suspension Valves
(Located on the left-hand
front and rear air bags)
-Typical View
* Front left-hand air bag shown
• Left-
Hand
• Right-
Hand
Summary of Contents for STS12i Combo
Page 276: ......
