3-41
SECTION 3 –
CAB
To Change Target Speed
•
Press the Adjust Button (located on the
Settings Page) for desired field or road
speed setting.
•
On the “Speed Settings” screen, evenly
space target speeds as desired using the
Up/Down Buttons for each setting
(First
Range Top Speed, Last Range Top Speed,
and Number of Ranges).
Example:
If the “Number of Ranges Field” is set to 4,
First Range Top Speed=5, and Last Range
Top Speed=20, range selection would look
like the following:
•
Press OK.
The machine will automatically adjust the
new Target Speed according to the newly
entered values.
Throttle
Throttle Control Slope
Determines how fast engine speed
increases when the Throttle Switch (located
near the Hydrostatic Drive Control Handle) is
pressed in the UP (“rabbit icon”) position.
NOTE: Values are set as a percentage per
second.
NOTE: If Throttle Control Slope is set at 25
percent/per second and Throttle Max
is set at 100 percent, Throttle Up
Ramp should be at least four (4)
seconds to achieve 100 percent
throttle when operating the Throttle
Switch.
Target Speed
(Located on the Home
Page - Road and Field Mode)
Adjust Buttons - Field/Road Speed Settings
(Located on the Settings Page)
Range
1
2
3
4
Target
Speed
5
5
1
10
15
20
Speed Settings Screen
* Field Speed Settings Shown
Summary of Contents for STS12i Combo
Page 276: ......
