SECTION 7 –
SPRAY SYSTEMS
7-45
2. Rotate Solution Tank Fill Valve to the
OPEN (counter-clockwise) position and
fill tank to desired level.
3.
When finished filling the tank,
close
the Solution Tank Fill Valve.
4. Remove solution supply from the Solu-
tion Tank Fill Port.
5. Reinstall fill port cap.
Filling the Rinse Tank
1. Remove fill port cap from the Rinse Tank
Fill Port.
2. Connect operator-supplied connection to
the Rinse Tank Fill Port.
3. Rotate Rinse Tank Fill Valve to the
OPEN (counter-clockwise) position and
fill tank to desired level.
4.
When finished filling the tank,
close
the Rinse Tank Fill Valve.
5. Remove operator-supplied connection
from the Rinse Tank Fill Port.
6. Reinstall the fill port cap.
DRAINING YOUR SOLUTION
TANK
Rear Fill Assembly
(Located behind rear left-hand wheel)
-Typical View
• Solution
Tank Fill Port
• Solution Tank
Fill Valve
Rear Fill Assembly
(Located behind rear left-hand wheel)
-Typical View
• Rinse Tank
Fill Valve
• Rinse Tank
Fill Port
CAUTION
Wear the appropriate clothing and
Personal Protective Equipment (PPE)
when working with agricultural
chemicals. Do not store chemical-
soaked clothing inside the cab.
DANGER
NEVER ENTER SOLUTION
TANK WITH WHOLE BODY.
FAILURE TO COMPLY WILL RESULT
IN SERIOUS INJURY OR DEATH.
Summary of Contents for STS12i Combo
Page 276: ......