SECTION 2 –
SAFETY AND PRECAUTIONS
2-8
EMERGENCY EXIT
In the event of an emergency, use the cab
door to exit the machine. Should the cab door
become inoperable, an Emergency Exit Tool
(located along the rear right-hand side of cab)
is provided and is used in the rare event to
shatter the glass of the cab.
•
Using the metal end of the Emergency
Exit Tool, repeatedly strike the glass to
shatter.
Should the need arise to escape from a seat
belt that may become inoperable, use the
“hook end” of the Emergency Exit Tool to cut
the seat belt.
FIRE EXTINGUISHER
Your machine is equipped with a Fire
Extinguisher (located along the platform on
the left-hand side of machine). In the event
that use of the Fire Extinguisher is required,
follow the manufacturer’s operating
instructions provided on the Fire
Extinguisher.
To Remove Fire Extinguisher
•
Pull the Security Latch OUTWARD to
disengage and remove Fire Extinguisher.
CAUTION
Do not look directly at the glass when
using the Emergency Exit Tool. Failure
to comply may result in personal injury.
NOTICE
The Emergency Exit Tool is a permanent
fixture of the machine. Do not remove
from cab under any circumstances.
Emergency Exit Tool
(Located along rear right-hand side of cab)
-Typical View
Summary of Contents for STS12i Combo
Page 276: ......
