VII.
SERVICE AND MAINTENANCE
C. FILTERS
90
OTHER STRAINERS
SOLUTION LINE “Y” STRAINER–
To help maintain consistent application rates, check the solu-
tion line strainer (fig. 7.90-1) daily for blockage. Clean the strainer screen as required. Be sure to wear appro-
priate clothing while removing and cleaning the line strainer screen. Replace with a 50 or 80 mesh strainer
screen. Confirm the gasket is in place before re-installing the screen.
Check all strainers occasionally for blockage and replace
them if they show signs of deterioration. Refer to the Hagie Parts
Manual for replacement part numbers and specific locations.
FIG 7.90-1
FRESH AIR CAB FILTERS
PAPER FILTER–
The paper filter should be cleaned every 50 hours,
or more often if necessary. Remove the paper element and gently tap it
against a flat surface. Direct low pressure compressed air through the filter
to remove larger particles. Replace the paper filter if necessary.
CHARCOAL FILTER–
Remove and replace the charcoal filter at the
first signs of chemical odor entering the cab.
To remove, clean, or replace the filters in the
cab, undo the thumb screws on the cover (figure
7.90-2, item 1) and carefully remove the filters. Wipe the cover clean with a damp
cloth and allow to dry before replacing.
Figure 7.90-3 shows the air tube that allows fresh air into the cab. Check it often
for any material blocking the opening.
FIG 7.90-3
FIG 7.90-2
1
SERVICE AND MAINTENANCE
