IV.
OPERATING SYSTEMS
65
E. SPRAY SYSTEMS
SOLUTION QUICK FILL–
To fill the solution tank, make sure the sump valve under the tank (fig. 65-1)
is open. To access the front fill, pull the front fill latch lever down (fig. 65-2) and the assembly will lower (fig. 65
-3). Connect it to your solution supply, fill to the desired level. You may also fill the rinse tank from the ground
level with the owner supplied connection. When finished, shut all of the valves and return the front fill to the
locked position. See the next page for information regarding the use of the side fill inductor for filling the solu-
tion tank.
FIG 65-1
FIG 65-2
FIG. 65-3