7-20
SECTION 7 –
SPRAY SYSTEMS
2. Press and hold the corresponding Left
and Right-Hand Boom Switches (located
on the Hydrostatic Drive Control Handle)
in the UP position to raise the level cylin-
ders all the way up.
3. Press and hold the Left and Right-Hand
Boom Switches in the OUT position to
unfold the main boom sections until they
come to a complete stop.
NOTE: Unfold booms simultaneously to
prevent weight imbalance.
4. Lower the level cylinders until the boom
is parallel with the ground.
5. Press and hold the Left and Right Boom
Extension Switches (located on the side
console) in the UP position to unfold the
boom extensions all the way OUT.
Folding/Retracting the Boom
NOTE: Ensure the Hydrostatic Drive Control
Handle is in the NEUTRAL position.
If the machine is put in gear during
fold operation, boom movement will
stop.
1. Press the Boom State Button (located on
the Machine Display Auxiliary Controls
Page) to the MANUAL position.
NOTE: The selected boom state will
illuminate.
2. Lower the level cylinders until the boom
is parallel with the ground.
3. Press and hold the Left and Right Boom
Extension Switches (located on the side
Left and Right-Hand Boom Switches
(Located on the Hydrostatic
Drive Control Handle)
-Typical View
• Right
Boom
OUT
• Right
Boom
DOWN
• Right
Boom
UP
• Right
Boom
IN
• Left
Boom
UP
• Left
Boom
OUT
• Left
Boom
IN
• Left
Boom
DOWN
• Left Boom
Extension Switch
• Right Boom
Extension Switch
Left and Right Boom Extension Switches
(Located on the side console)
-Typical View
Boom State Button - Auto/Manual
(Located on the Machine Display
Auxiliary Controls Page)
