SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
8-10
Refer to “Spray Booms” elsewhere in this
section for further information.
Nozzle Bodies
Nozzle Bodies are located throughout the
boom and consist of a spray tip, gasket, and
cap. The spray tip breaks the solution into
droplets of correct size and forms a uniform
spray pattern.
NOTE: Dual Product System is equipped
with single Nozzle Bodies.
Visit
www.teejet.com
for further
information.
Section Strainers
-If Equipped
(80-Mesh Strainer Screens)
Section Strainers are located throughout
each boom section and filter impurities to aid
in the avoidance of spray nozzle buildup.
Refer to “Service - Filters” provided in the
Maintenance and Storage Section
elsewhere
in this manual for maintenance information.
Solution Line Strainers (2)
(50-Mesh Strainer Screen)
Solution Line Strainers are located
beneath the center right-hand side of
machine (Primary), and near the front right-
hand side of machine (Secondary) and are
the main strainers to filter solution system
impurities and maintain consistent
application rates.
Hypro Express End Cap
-Typical View
Nozzle Body
(Located throughout boom)
-Typical View
Section Strainers
(Located throughout each boom section)
-Typical View
