8-15
SECTION 8 –
DUAL PRODUCT SPRAY SYSTEMS
13. Press the Solution Pump Button (located
on the spray system console) to activate
the Secondary Solution Pump.
14. If desired, activate the Agitation System
by pressing and holding the Agitation
Valve Switch (located on the side con-
sole) in the UP position to increase flow,
or in the DOWN position to decrease
flow.
NOTE: Agitation Valve pressure is displayed
on the Machine Display Home Page
(Field Mode).
15. Press the Master Spray Switch (located
on the Hydrostatic Drive Control Handle)
in the ON position.
NOTICE
Do not allow the Solution Pump to run
continuously while the Boom Solution
Valve Switches are off. Failure to comply
will generate overheating, causing
severe pump damage and will void the
warranty.
NOTICE
Do not allow the Solution Pump to run
continuously while the Boom Solution
Valve Switches are off. Failure to comply
will generate overheating, causing
severe pump damage and will void the
warranty.
Solution Pump Switch -
Primary
(Located on the side console)
-Typical View
Solution Pump Button -
Secondary
(Located on the spray system console)
-Typical View
Agitation Valve Pressure Indicator
(Located on the Machine Display
Home Page - Field Mode)
