3-3
SECTION 3 –
CAB
•
(N) - Armrest Height/Length Adjuster
•
(O) - Lumbar Knob
•
(P) - Document Pouch
Headrest (A)
(Adjusts height and tilt)
•
Firmly grasp headrest and pull UP for
higher adjustment.
•
Firmly grasp headrest and push DOWN
for lower adjustment.
Tilt:
(First Position: hold and rotate down 10-
degrees; Second Position: hold and rotate
down 20-degrees; Third Position: hold and
rotate down 30-degrees. Hold and rotate
down to return Headrest to 0-degree posi-
tion).
Heat/Cool Selector Switch (B)
(Selects between heat and cool settings)
•
Press Heat/Cool Selector Switch FOR-
WARD to cool.
•
Press Heat/Cool Selector Switch REAR-
WARD to heat.
Heat/Cool Temperature Switch (C)
(Switches heat/cool temperature to high, low,
or off settings)
•
Press Heat/Cool Temperature Switch UP
for HIGH heat or cool.
•
Press Heat/Cool Temperature Switch
DOWN for LOW heat or cool.
•
Press Heat/Cool Temperature Switch to
the MID position to turn OFF.
Armrest Tilt Dial (D)
(Tilts armrests)
•
Roll Armrest Tilt Dial (located on each
side of operator’s seat) INWARD
(towards operator) to tilt armrest DOWN.
•
Roll Armrest Tilt Dial OUTWARD (away
from operator) to tilt armrest UP.
Height Adjustment Switch (E)
(Moves seat up and down)
•
Press Height Adjustment Switch UP to
increase seat height.
•
Press Height Adjustment Switch DOWN
to decrease seat height.
Recline Lever (F)
(Angles back rest cushion)
•
Pull and hold Recline Lever UP to adjust
back rest angle. Release lever when
desired angle is achieved.
Slide Release Lever (G)
(Moves top of seat fore/aft)
•
Pull and hold Slide Release Lever while
sliding seat forward or rearward.
Release lever when desired position is
achieved.
J
K
L
M
N
O
P
