3-9
SECTION 3 –
CAB
Steering Column Release Pedal
The Steering Column Release Pedal is
featured for ease of exiting and entering the
cab.
•
With your foot on the Steering Column
Release Pedal (located on the lower left-
hand side of the steering column), push
pedal DOWN and move the steering col-
umn to desired position.
•
To lock the steering column in desired
position, remove your foot from the
Steering Column Release Pedal while
holding the steering column in place.
•
Once the steering column has engaged
into locked position, firmly move the
steering column in either direction to
ensure security.
Operator Foot Pegs
-If Equipped
Operator Foot Pegs are located on each
side of the steering column to provide added
comfort and stability while operating the
machine.
Deceleration (Decel) Pedal
When nearing an end row and speed
deceleration is desired, press the Decel
Pedal (located to the lower right-hand side of
the steering column) to decrease speed.
CAUTION
Ensure the steering wheel and steering
column are in the locked position before
attempting to operate the machine.
Failure to comply may result in difficulty
maintaining control of the machine.
Steering Column Release Pedal
(Located on the lower left-hand
side of the steering column)
-Typical View
CAUTION
The Decel Pedal is NOT a brake. It is
designated for speed reduction only.
Operator Foot Pegs
(Located on each side
of the steering column)
-Typical View
