3-33
SECTION 3 –
CAB
Warning Buzzer
The Warning Buzzer alerts the operator
when a system fault is detected and requires
immediate attention. To silence the buzzer,
press the Sound Button (located on the
Settings Page) to the OFF (red illuminated
“disabled”) position.
NOTE: The Sound Button will reset to the
ON (enabled) position each time the
ignition key is cycled.
Lighting Adjustment
(Day Time/Night Time)
To Adjust the Display, Section Keypad,
Side Console Switches, and Gauge Post
Lighting
•
Press the Brightness Button (located on
the Settings Page).
•
On the “Brightness” screen, press
desired “Day Time” or “Night Time” But-
ton.
•
Adjust corresponding day time and/or
night time Display, Section Keypad, Side
Console Switches, Gauge Post, or All
brightness levels UP or DOWN to
desired setting.
•
Press BACK when finished.
To Set Automatic Night Time/Day Time
Transition Brightness
NOTE: Brightness levels must be manually
set (as previously described) before
setting automatic transition
brightness.
•
On the “Brightness” screen, press the
Settings Button.
•
On the “Transition Settings” screen,
press EDIT (next to Enable Time Transi-
tion).
Warning Light Indicator
(Located on the top left-hand
side of each display page)
Sound Button
(Located on the Settings Page)
Brightness Button
(Located on the Settings Page)
Brightness Screen
