IV.
OPERATING SYSTEMS
48
OPERATING SYSTEMS
D. SPRAY SYSTEMS
SOLUTION TANK–
The stainless steel tank (fig. 48-1), is
1600 gallon capacity. The tank has a sparge type agitation sys-
tem.
FIG. 48-1
SOLUTION TANK VALVE–
The solution tank valve (fig. 48-2, item
A) controls the amount of solution coming out of the tank. The valve is
controlled from inside the cab with
the TANK VALVE switch (fig. 48-3)
located on the right hand console.
TANK SUMP VALVE–
The
tank sump valve (fig. 48-2, item B) is
a ball type valve that has to be turned on and off manually. This valve is
to allow the fluid into the tank from the fill option.
FIG 48-2
B
1
FIG 48-3
SOLUTION PUMP–
The solution pump (fig. 48-4) is a centrifugal type hydraulic pump that is controlled
by the Pulse Width Modulated Valve (fig. 48-5) and the Raven console (fig. 48-6). The pump draws the solu-
tion out of the tank at a rate determined during the calibration of the Raven console. It dispenses it through the
many valves and hoses that make up the spray system. The pump is also used for the agitation system and
the rinse system.
FIG. 48-4
FIG. 48-5
FIG. 48-6
Summary of Contents for UpFront STS 16
Page 119: ...113 IX TROUBLE SHOOTING NOTES TROUBLE SHOOTING...
Page 127: ...NOTES NOTES...
