VII.
SERVICE AND MAINTENANCE
C. FILTERS
92
SERVICE AND MAINTENANCE
OTHER STRAINERS
POLY RINSE TANK STRAINER–
If you have the pressure washer option on your sprayer you will
have a 100 mesh strainer in the line from the rinse tank to the pressure washer (refer to Hagie Parts Manual
for location). Check the strainer for blockage if you are unable to get pressure.
SOLUTION LINE “Y” STRAINER–
To help maintain consis-
tent application rates, check the solution line strainer (fig. 92-1) daily
for blockage. Clean the strainer screen as required. Be sure to wear
appropriate clothing while removing and cleaning the line strainer
screen. Confirm the gasket is in place before re-installing the screen.
Check all strainers occasionally for blockage and replace
them if they show signs of deterioration. Refer to the Hagie Parts
Manual for replacement part numbers and specific locations.
FIG 92-1
FRESH AIR CAB FILTERS
PAPER FILTER–
The paper filter should be cleaned every 50 hours,
or more often if necessary. Remove the paper element and gently tap it
against a flat surface. Direct low pressure compressed air through the filter
to remove larger particles. Replace the paper filter if necessary.
CHARCOAL FILTER–
Remove and replace the charcoal filter at the
first signs of chemical odor entering the
cab.
To remove, clean, or replace the
filters in the cab, undo the thumb screws on the cover (figure 92-2, item
A) and carefully remove the filters. Wipe the cover clean with a damp
cloth and allow to dry before replacing.
Figure 92-3 shows the air tube that allows fresh air into the cab.
Check it often for any material blocking the opening.
FIG 92-3
FIG 92-2
A
Summary of Contents for UpFront STS 16
Page 119: ...113 IX TROUBLE SHOOTING NOTES TROUBLE SHOOTING...
Page 127: ...NOTES NOTES...
