2-8
SECTION 2 –
SAFETY AND PRECAUTIONS
In the event of an emergency, use the cab
door to exit the machine. Should the cab door
become inoperable, an Emergency Exit Tool
(located along the rear right-hand side of
cab) is provided and is used in the rare event
to shatter the glass of the cab.
•
Using the metal end of the Emergency
Exit Tool, repeatedly strike the glass to
shatter.
Should the need arise to escape from a
seat belt that may become inoperable, use
the “hook end” of the Emergency Exit Tool to
cut the seat belt.
FIRE EXTINGUISHER
Your machine is equipped with a Fire
Extinguisher (located along platform on the
left-hand side of machine). In the event that
use of the Fire Extinguisher is required,
follow the manufacturer’s operating
instructions provided on the Fire
Extinguisher.
To Remove Fire Extinguisher
•
Pull the Security Latch OUTWARD to
disengage and remove Fire Extin-
guisher.
Inspection and Replacement
Follow the manufacturer’s
recommendations on inspection and
replacement.
FIRST AID KIT
-If Equipped
A First Aid Kit (located beneath the
operator’s seat) is provided for your
convenience.
NOTE: Keep an accurate inventory of
supplies in the First Aid Kit and
dispose of any item(s) that have
expired.
NOTICE
The Emergency Exit Tool is a permanent
fixture of the machine. Do not remove
from cab under any circumstances.
Emergency Exit Tool
(Located along rear right-hand side of cab)
-Typical View
Fire Extinguisher
(Located along platform on
left-hand side of machine)
-Typical View
• Security
Latch
