Hague ST-200, Setup Manual

OR-05/18/15

Smart Touch Controller Setup Guide

pg.3

Quality Water International 

®

Smart Touch Controller

Setting the Touch Screen Controller

This appliance features a touch screen controller with a color screen display. The controller can be used to view the 
appliance’s status, perform regenerations, and change settings. An independent Hague dealer should set the Service 
Settings during the installation of the appliance.

Note:  Ensure that the bottom 
of the controller is firmly locked 
onto the four tabs on the top of 
the drive end cap assembly.

Figure 3: Smart Touch Controller

Customer Settings

Gallons Remaining

Message/Status Indicator

Regenerate

Service Settings

Water Flow Indicator

1. “OK” Button - Press after information is added and move to next screen.
2. “Back” Button - Navigates to the previous screen.
3. “Clr” Button - Resets all values to 0 and/or default value.
4. “Esc” Button - Escapes to the main menu.
5. “day” Button - Press each time to advance day when applicable.
6. “AP” Button - Toggles time between AM/PM when applicable.

Button Function

Incorrect

Correct