22
Aegis Thermostats and the Programmable Energy Saver Module (PESM) provides energy savings, comfort, and convenience by
setting the HVAC system(s) to the proper temperature based on whether you are home, asleep, away, or vacation. The
temperature can be reported as well as controlled over any telephone. A freeze alarm feature will cause a dial out if the
temperature falls below a preset level.
The Aegis Thermostats are digital heating and cooling thermostats that can be controlled be the user and by remote control.
There are models for conventional single stage (gas or electric), heat pumps, and multi stage heating and cooling systems. All
models offer programmability, stand-alone operation, and robust communication to the Aegis 1000 system.
Aegis Thermostats
The following control actions are allowed for HSP Communicating Thermostats:
•
Set heating setpoints
•
Set cooling setpoints
•
Set system mode (Off / Heat / Cool / Auto)
•
Set fan (On / Auto)
•
Turn hold On and Off
NOTE:
Not all actions are applicable to every type of thermostat.
To enter the temperature menu, from the top-level display or from the main menu, press the 5 (TEMP) key on the console keypad.
You will be prompted with the first named temperature zone (i.e. Upstairs). The temperature zone can be specified by entering
the temperature zone number followed by the ' # ' key, or by pressing the arrow keys to scroll through the list of temperature
zones. Press the ' # ' key when the desired temperature zone is shown.
Press the ' 0 ' key to select all Aegis Thermostats. This is a simple way to broadcast the new Heat or Cool setting or change the
system mode, fan mode, or hold mode of all Aegis thermostats in your system. Temperature zones 1 and 2 are for Aegis
thermostats.
TEMPERATURE:
ENTER TEMP ZONE 0=ALL
↓
After the ' # ' key is pressed, a menu appropriate for the type of temperature zone is shown. For Celsius temperatures, press the ' #
' key prior to entering the temperature to make the number negative. The Celsius temperature may also be specified in 0.5 degree
steps, if three numeric digits are entered. The third digit adds a .5 to the first two digits, if it is anything other than zero. Enter a
leading zero, if necessary.
For Aegis heat/cool thermostats:
Upstairs
1=MODE 2=HEAT 3=COOL
↓
Upstairs
4=FAN 5=HOLD #=STAT
↑
To change the system mode on a thermostat, press 1 (MODE). A menu presenting options appropriate for that type of thermostat
is then displayed.
For heat/cool thermostats with auto changeover:
Upstairs MODE
0=OFF 1=HEAT 2=COOL
↓
Upstairs MODE
3=AUTO
↑