53
Audible Exit Delay
The Audible Exit Delay is an audible indication from the console beeper while the exit delay is in effect. During the last 10
seconds of the exit delay, the audible indication will beep twice as fast to let you know that you must leave at once.
The default setting for Audible Exit Delay is Yes.
Entry/Exit Chime
When Entry/Exit Chime is set to Yes, the console(s) will beep once when a door on an entry/exit zone is opened, even if the alarm
system is off. This lets you know when someone enters and leaves.
The default setting for Entry/Exit Chime is Yes.
Perimeter Chime
When Perimeter Chime is set to Yes, the console(s) will beep once when a window or any other perimeter zone is opened, even if
the alarm system is off.
The default setting for Perimeter Chime is Yes.
Enable Quick Arm
The Quick Arm feature allows the security system to be armed by pressing the desired mode key twice instead of having to enter
your code.
The default setting for Enable Quick Arm is No.
Enable Auto Bypass
The Auto-Bypass feature allows the system to automatically bypass an open zone when the system is armed, rather than setting
off the alarm. In some applications, it may be preferable to allow arming
only
if all zones are secure (READY).
With Auto-Bypass Off, all zones to be armed must be secure when the system is armed. Otherwise, the console will beep three
times and display "ZONE NOT RDY". If the system is armed and a zone is open when the Exit Delay expires, the alarm will
sound.
All On For Alarm
This option will instruct Aegis 1000 to execute an X-10 All On command in the event that any type of alarm occurs.
Beep On Trouble
If the Aegis 1000 detects any troubles with itself or one of the zones connected to it, it will display a message on the screen and
beep the console twice per second, continuously (i.e. beep beep...beep beep...). You can silence this sound by pressing the ' * '
key. However, if the trouble occurs again, the beeper will start beeping again.
If you do not wish to hear the beeping sound when trouble occurs, set Beep On Trouble to No.
The default setting for Beep On Trouble is Yes.
Set up Miscellaneous
To configure Miscellaneous items in the system, from the Set Up menu, press the 6 (MISC) key.
High Security Mode
In High Security Mode, the Master or Manager code is always required to do the following functions:
