Page 96
HOUSE CONTROLLER
(CONTROLS UP TO 8 ROOMS)
UNIT 25
ROOM 4
UNIT 9
ROOM 2
UNIT 1
ROOM 1
UNIT 17
ROOM 3
UNIT 57
ROOM 8
UNIT 41
ROOM 6
UNIT 33
ROOM 5
UNIT 49
ROOM 7
AVAILABLE UNITS:
8, 16, 24, 32, 40, 48, 56, and 64
APPENDIX A – UNDERSTANDING HLC
Each button on the House Controller is used to toggle all of the lights in the respective room on and off. When the room is turned
on, the LED indicator behind the respective button is illuminated and all of the lights in the room are turned on. When the room
is turned off, the LED indicator behind the respective button is turned off and all of the lights in the room are turned off. If a
lighting load in the respective room is turned on, the LED indicator behind the button is illuminated. When all lighting loads in
the respective room are turned off, the LED indicator behind the button is turned off.
Each House Controller controls 8 consecutive rooms. To configure a House Controller to control a group of 8 rooms, it must be
set to the last unit number in one of the respective rooms.
For example, a House Controller set to Unit 8, 16, 24, 32, 40, 48, 56, or 64 can be used to control Rooms 1-8. This allows you to
have up to 8 House Controllers throughout the house that control Rooms 1-8.
About Lumina Mode Controllers
The HAI UPB™ Lumina Mode Controller is use to set the current mode in a Lumina System. To configure a Lumina Mode
Controller, it must be set to the last unit number (8
th
unit) in a room and must not be named. For example, Unit 8, 16, 24, 32, 40,
48, 56, and 64 may be used for Lumina Mode Controller. This allows you to have up to 8 Lumina Mode Controllers throughout
the house.
Summary of Contents for lumina
Page 2: ...Copyright 2001 2006 Home Automation Inc All Rights Reserved...
Page 114: ......
Page 115: ......
Page 116: ...HAI New Orleans LA U S A...
