background image

Page 45 

 

EVENTS 

 
The Event Log records the 250 most recent significant system Events (happenings) and trouble conditions in the system.  When a 
new event occurs, the oldest one is lost. 
 
The following Events, along with the time and date of their occurrence are recorded in the Event Log when they occur: 
 

 

Whenever the Lumina mode is changed.. 

 

Any trouble condition (zone, battery, fuse, AC power, or phone). 

 

Messages that are logged. 

 

The restoration of any trouble condition (the trouble condition ceased to occur). 

 

Any Remote Telephone Access, Remote Access Denied, or Remote PC Access. 

 
Show Events 

 
To view your event log, from the top-level display or from the main menu, press the 7 (EVENTS) key on the numeric keypad. 
   

 

 

 

5=TEMP      6=STATUS

 

 

 

 

7=EVENTS    8=MESSAGE  

 

 
Each event log entry displays the time and date on the top line and a description of the event on the bottom line.  The arrow keys 
may be used to scroll through the event log, starting with the most recent event. 

 

 

 7:15 PM  5/08

 

   MODE 

AWAY

 

 
For trouble conditions, the event log will show the zone name or specific trouble condition and "TROUBLE": 

 
   10:59 

AM 

 

5/08

 

   BATTERY 

LOW 

TROUBLE

 

 
For trouble restorations, the event log will show the zone name or specific trouble condition and "TRBL RST": 
 

 

 

 

11:57 AM  5/08

 

   BATTERY 

LOW 

TRBL 

RST

 

 
When the Message feature is used to log a message, the message along with the time and date is displayed – 

See

 

Messages

 

 

 

 

 6:00 PM  5/08

 

   MAIL 

ARRIVED 

 
The system records each remote access.  A remote phone access is when someone calls into the system from an outside phone 
line.  Remote phone access is also recorded if the system calls out in response to an alarm and the called party enters a code.  The 
event log displays the code used to access the system and "REM ACCESS": 

 
 

 

 

 7:05 PM  5/08

 

   USER 

NAME 

REM 

ACCESS

 

 
An event is logged after three unsuccessful attempts are made to log into the system from a remote phone, the Lumina will lock 
out remote telephone access for 1 hour to discourage any further attempts to access the system - 

See

 

Telephone Control

 
Local access of the system using an in-house telephone is not recorded. 
 
The event log will also record each time the PC Access software is used to access the system.  The event log displays the code 
used to access the system and "PC ACCESS". 

 

Summary of Contents for lumina





















































































































Reviews: