Page 54
To access a serial port, use the HAI Model 21A05-2 Serial Cable Kit. Plug one end of the cable into one of the modular serial
port connectors on the controller. Plug the other end into the Model 21A05-1 Communication Cable Adaptor (modular to DB-9
RS-232), which connects the Lumina serial port to the computer's DB-9 RS-232 port.
To make your own serial cable, follow the diagrams below. When making connections, be sure to correctly orient the cable as
shown (with the tab on the modular cable facing up, make sure that the Yellow wire is at the top).
Connect the Yellow, Green, Red, and Black wires to the DB-9 connector as shown. Also, connect Pins 1, 4, and 6 together and
Pins 7 and 8 together.
6 DSR
BOTTOM VIEW
DB9-FEMALE
5 GND
2 RX
3 TX
1 DCD
4 DTR
9
8
7
6
8 CTS
7 RTS
2
4
5
3
1
YELLOW
GREEN
RED
BLACK
SIDE
TOP
4 POSITION MODULAR
PHONE CABLE
- YELLOW WIRE ON TOP -
- TAB UP -
RS-232 CONNECTIONS
YELLOW
GREEN
A
B
TOP
SIDE
- YELLOW WIRE ON TOP -
4 POSITION MODULAR
PHONE CABLE
- TAB UP -
RS-485 CONNECTIONS
Summary of Contents for lumina
Page 2: ...Copyright 2001 2006 Home Automation Inc All Rights Reserved...
Page 114: ......
Page 115: ......
Page 116: ...HAI New Orleans LA U S A...