background image

APPENDIX A – UNDERSTANDING HLC 

A3 

HOUSE CONTROLLER

(CONTROLS UP TO 8 ROOMS)

UNIT 25

ROOM 4

UNIT 9

ROOM 2

UNIT 1

ROOM 1

UNIT 17

ROOM 3

UNIT 57

ROOM 8

UNIT 41

ROOM 6

UNIT 33

ROOM 5

UNIT 49

ROOM 7

AVAILABLE UNITS:

8, 16, 24, 32, 40, 48, 56, and 64

 
The Lumina controller keeps track of the exact status of each unit even when a lighting scene is initiated by the Room Controller.  
Room Controllers also keep track of when individual switches in a room are turned on and off.  When all of the lighting loads in a 
room are turned off, the “Off” indicator is illuminated.  If any of the lighting loads in a room are turned on at an HAI UPB™ Wall 
Switch or Dimmer, the “On” indicator will illuminate and the “Off” indicator is turned off.  Likewise, if the “On” indicator or one of 
the scene indicators is illuminated, and then all of the lighting loads are turned off at HAI UPB™ Wall Switches, the “Off” indicator 
will illuminate and any others are turned off.   
 

About House Controllers 

 

Each HAI UPB™ 8-Button House Controller allows for controlling all 8 rooms 
of lighting where HAI UPB™ Wall Switches, Dimmers, and Modules have been 
installed.   
 
Each button on the House Controller is used to toggle all of the lights in the 
respective room on and off.  When the room is turned on, the LED indicator 
behind the respective button is illuminated and all of the lights in the room are 
turned on.  When the room is turned off, the LED indicator behind the respective 
button is turned off and all of the lights in the room are turned off.  If a lighting 
load in the respective room is turned on, the LED indicator behind the button is 
illuminated.  When all lighting loads in the respective room are turned off, the 
LED indicator behind the button is turned off.   
 
Each House Controller controls 8 consecutive rooms (i.e. Room 1-8, Room 9-16, 
Room 17-24, and Room 25-31). To configure a House Controller to control a 
group of 8 rooms, it must be set to the last unit number in one of the respective 
rooms.  For example, a House Controller set to Unit 8, 16, 24, 32, 40, 48, 56, or 
64 can be used to control Rooms 1-8.  This allows you to have up to 8 House 
Controllers throughout the house that control Rooms 1-8.   
 
 
 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
When used with Lumina Pro, House Controllers for Rooms 9-16, 17-24, and 25-31 are configured in a similar manner.  For example: 
 

 

Unit 72, 80, 88, 96, 104, 112, 120, and 128 can be used to control Rooms 9-16. 

 

Unit 136, 144, 152, 160, 168, 176, 784, and 192 can be used to control Rooms 17-24. 

 

Unit 200, 208, 216, 224, 232, 240, and 248 can be used to control Rooms 25-31. 

UNIT 1

ROOM 1

ROOM 1

UNIT 5

ROOM 1

UNIT 6

ROOM 1

ROOM 7

ROOM 1

UNIT 2

ROOM 1

UNIT 3

ROOM 1

UNIT 4

LIVING ROOM

ROOM CONTROLLER

LIGHTING LOADS IN

LIVING ROOM

UNIT 8

Summary of Contents for lumina


























Reviews: