Page 7
You should assign a name to each HLC lighting device (as described above) before you configure it. Lumina has a list of names for
you to select from. To name the HLC devices, from the Setup menu, press the 7 (NAMES) key:
UNIT 1:
00-95 #=LIST
Press the ' # ' key to display a list of names that are stored in the controller. Each name in the list is displayed on the bottom line of the
display.
UNIT 1:
Basement
When using the list of names, the following should be observed:
The first item in the list is blank. This is used to delete an existing name for the respective Unit Number.
The list is in alphabetical order.
If the Unit Number is the 1st unit in a Room (i.e. Unit 1, 9, 17, 25, etc.), the list will start with Room names.
In the Unit Number is between the 2
nd
and 8
th
unit in a Room, the list will start with Lighting Load names.
Use the up arrow (
) and down arrow (
) keys to scroll through the list of available names for the device. When appropriate name
appears, press the ' # ' key to select that name for the device. The name now appears next to the Unit designation:
UNIT 1: Living Room
00-95 #=LIST
Once the name is selected for the specified Unit, press the down arrow key to name the next unit.
Delete a Unit Name
If you remove a device, move a device to a different location, or program a device into an incorrect location, you should delete the
existing name for the respective Unit Number.
To delete an existing name, from the Setup menu, press the 7 (NAMES) key. Use the up arrow (
) and down arrow (
) keys to scroll
through the list of existing names. When the Unit Number or name appears that you wish to delete, press the ' # ' key:
UNIT 7: Table Lamp
00-95 #=LIST
Press the ' # ' key to display a list of names that are stored in the controller. The first name is actually blank:
UNIT 7: Table Lamp
Simply press the ' # ' key to delete the name.
UNIT 7:
00-95 #=LIST