Page 43
Messages can be setup so that they can be displayed in a specific area or in all areas.
MESSAGES
1-8
AREAS:
1 2 0=CLR
↓
MESSAGES 9-16 AREAS:
1 2 0=CLR
↕
MESSAGES 17-24 AREAS:
1 2 0=CLR
↕
MESSAGES 25-32 AREAS:
1 2 0=CLR
↕
MESSAGES 33-40 AREAS:
1 2 0=CLR
↕
MESSAGES 41-48 AREAS:
1 2 0=CLR
↕
MESSAGES 49-56 AREAS:
1 2 0=CLR
↕
MESSAGES 57-64 AREAS:
1 2 0=CLR
↑
SETUP TEMPERATURES
To configure temperatures from the Installer Setup Menu, press the 5 (Temp) key.
TEMPERATURE DISPLAY
This allows you to choose between Fahrenheit and Celsius temperature format.
TEMPERATURE DISPLAY: 1
1=FAHRENHEIT
2=CELSIUS
↓
THERMOSTAT TYPE
If HAI thermostats are part of the system, this item specifies the thermostat type for each thermostat (this enables the thermostat).
If thermostats are used, they must be configured to the applicable thermostat type. When any THERMOSTAT TYPE is changed
from the default setting of "Not Used", Zone 16 and Output 8 is automatically configured for thermostats. There is no need to
change the ZONE TYPE for Zone 16 or OUTPUT TYPE for Output 8.
For thermostat types, the current setting is shown on the bottom line.
THERMOSTAT 1 TYPE: 0
NOT USED #=CHNG
↕
THROUGH
THERMOSTAT 4 TYPE: 0
NOT USED #=CHNG
↑
Summary of Contents for OMNI II
Page 2: ......
Page 21: ...Page 15 BLACK RED RED FIGURE 7 SOUNDER CONNECTIONS...
Page 67: ......
Page 68: ...HAI New Orleans LA U S A...
