HAI Omni Pro II Owner'S Manual Download

Page: 84 / 108

Page 76

Dial Out Number 1

Dial Out Number 1

is one of the 8 numbers that are stored in the system. In the event of an alarm, these numbers are dialed in the

order that is set up in the

Dial Out Order

for the particular type of alarm. Dial out numbers 1 - 8 have On and Off times and days,

so that no time is wasted calling you at the office at night or on a Sunday if the alarm is activated.

For dial out number 1, you should enter your office number where you can be reached during working hours.

Enter the phone number the same way as described for My Phone Number.

You can cause the system to pause for two seconds between digits of the number by pressing the DAY key, which puts a T in the
number. Multiple Ts for longer pauses are allowed. You can also press the NIGHT key (*) and the AWAY key (#) for symbols
to get through some types of telephone or pocket beeper/pager systems.

To prevent a call waiting line from interfering with the dial out, you may use the call waiting cancel sequence at the beginning of
the number. The call waiting sequence is typically ' * 7 0 T ' (T = pause); however this may vary depending on your region.

If you wish to remove a phone number for a particular dial out number, press OFF then ' # ' (with the display showing a

Dial Out

Number

) to enter a single dash (-).

Phone numbers can be up to 24 digits.

DIAL OUT 1 ON
DIAL OUT 1 OFF

Dial Out Number 1

has two times associated with it, an On and Off time. The OmniPro II will only call this number if the time

and days are between the Dial Out 1 On and Dial Out 1 Off times and dates.

Press # to change the On and Off times -

See

Set Up Codes

DIAL

OUT

ON:

12:00

MTWTFSS

#=CHNG

DIAL

OUT

OFF:

NEVER #=CHNG

For example, if your normal work hours are 8 to 5 Monday through Friday, then set Dial Out 1 On to 8:00 AM MTWTF and Dial
Out 1 OFF to 5:00 PM MTWTF. With these settings, the system will call

Dial Out Number 1

only if the alarm is activated on

weekdays between the hours of 8:00 AM to 5:00 PM.

The default for

Dial Out 1 On

is 12:00 AM MTWTFSS, and the default for

Dial Out 1 Off

is Never, so that

Dial Out Number 1

always active.

The Time that was entered before setting an On or Off time to Never is saved, and will be redisplayed when a day is set in place
of Never. Setting both the

Dial Out 1 On

and the

Dial Out 1 OFF

times to Never will make Dial Out Number 1 never active.

Dial Out Numbers 2-8

The default Dial Out On and Off times are the same as

Dial Out Number 1

Dial Order

The dial order is the order in which call all will be placed if an Alarm is activated.

You can have the system make up to 8 calls in the event of an alarm. You may chose from

Dial Out Numbers 1 - 8

. You can

have the system dial a number twice (or more) which is suggested if you don't have a direct dial number at work, so that your
company operator can find you, if you aren't at your desk, and have you alerted for the next call.

Up to eight numbers may be entered. Enter the

Dial Out Order

by pressing the keypad digits 1, 2, 3, 4, 5, 6, 7, or 8 for

Dial Out

Numbers 1, 2, 3, 4, 5, 6, 7, or 8

, respectively. When you have entered the dial order of your choice, press ' # '. Enter a single ' 0 '

if no dial out is desired. The default

Dial Order

is 1 2 3 4 5 6 7 8.