background image

Source Lock

Source Lock is opted to hinder external input modes, such as AV, S -Video and VGA. Press CH+/- button to select

the option, and press VOL+/- button to display Source Lock menu. 

    Source Lock

AV1                         Off

S-Video                  Off

YPbPr/YCbCr        Off

VGA

  Off

DVI                           Off

Press CH+/- button to select desired option. Press VOL+/- button to set up the 

mode of  Source Lock. If some Source Lock is set on, the mode will be entered 

and the screen will display blue background with the mute mode activated

and Lock. In lock on mode, when screen is blank, icon Lock will be always

displayed on the screen.  If lock mode is to be verified, enter Source Lock sub

menu and set relative mode off or select Unlock mode in the Preset Prog.Menu.

Child Lock

Max Volume

Press CH+/- button to select Max Volume. Press VOL+/- button for adjustment between 0 100. If a certain value is set, 

when volume is being adjusted, the sound value cannot exceed maximum volume value. If current volume is over

Max Volume, when Lock Set menu is set, current volume will become set maximum volume. If current volume is 

below maximum volume, customer set volume will stay unchanged.

Unlock

Press  CH+/- button to select Unlock mode. 

Press VOL+/- button to unlock all set modes, setting all lock options to off,  and the maximum volume returns to 100. 

Press  CH+/- button to select Child Lock. Press VOL+/- button to set On or Off mode. If lock on mode is set,

Child Lock is inactivated automatically. In such case,  If buttons on TV are pressed, the screen will display Child Lock, 

which can be erased by press of EXIT button. 5 seconds later after the latest press, the screen display will disappear 

automatically. The Child Lock mode can be resumed by entering Lock Set menu to set Child Lock off or active Unlock.

Prog. Num is opted for setting up preset channel. Press CH+/- button to select Prog Num. Press VOL+/- button, to select

channel number.(The item is not available except TV signal.)

Prog.Num

28 Plasma TV

Summary of Contents for 42EP24S - 42" Plasma TV


































Reviews: