background image

 

 

 

Service Manual 

 

 

 
 

Chapter 1. General Information 

 

 

 
 

1-1. Document Information 

 

Document format: Adobe PDF 
Author: shouwang.wen 

Compiler:  

 
 

1-2. General Guidelines 

 

When servicing, observe the original lead dress. If a short circuit is found, replace all parts which 

have been overheated or damaged by the short circuit. 

 

After servicing, see to it that all the protective devices such as insulation barriers, insulation papers 

shields are properly installed. 

 

After servicing, make the following leakage current checks to prevent the customer from being 

exposed to shock hazards. 

1) Leakage Current Cold Check 

2) Leakage Current Hot Check 

3) Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive 

 

1-3. Important Notice 

 

1-3-1. Follow the regulations and warnings 

 

Most important thing is to list up the potential hazard or risk for the service personnel to open 

the units and disassemble the units. For example, we need to describe properly how to avoid the 

possibility to get electrical shock from the live power supply or charged electrical parts (even the 

power is off). 

 

This symbol indicates that high voltage is present inside.It is dangerous to make any 

king of contact with any inside part of this product. 

 

This symbol indicates that there are important operating and maintenance instructions 

in the literture accompanying the appliance. 

 

1-3-2. Be careful to the electrical shock 

 

To prevent damage which might result in electric shock or re, do not expose this TV set to rain 

or excessive moisture. This TV must not be exposed to dripping or splashing water, and objects 

lled with liquid, such as vases, must not be placed on top of or above the TV. 

 

1-3-3. Electro static discharge (ESD) 

 

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such 

 

 

3

Model No.: 55DA5550

Summary of Contents for 55DA5550





















































Reviews: