SERVICE MANUAL
Model:
18
Issue
Rev.
3-1-2.Removing and replacing the right door of freezer compartment
(For C2FE636CFJRU /C2FE636CSJRU/C2FE636CWJRU/C2FE637CXJRU)
Directions on how to dismantle and install the middle and lower hinges
⑴
Detach the 3 screws affixed to the middle hinge and remove the hinge. Unscrew the hinge
axis and then screw it from the reversed direction.
⑵
Remove the upper and lower doors separately. Dismantle the stop blocks on the bottom of
the doors. Turn them by 180 degrees and refit them on the other side.
⑶
Tilt the refrigerator to the required angle. Detach the screws fixing the lower hinge and
remove the hinge.
⑷
Fix the lower hinge to the bottom of the other side of the cabinet. Then, mount the lower door
on the lower hinge.
⑸
Take out the 3 hole plugs on the other side of the cabinet.
Turn the middle hinge by 180 degrees and install it on the other side of the cabinet. Attach the 3
screws removed in step 1. Mount the 3 hole plugs into the holes where the hinge is seated
originally.
Note: For 3-door refrigerators, the operation concerning the lower hinge is not needed.
Middle hinge
Screws affixed to
the middle hinge
Middle hinge
axis
Hole plug
Screws affixed to
the lower hinge
lower hinge
Before change
Refrigerator
After change
Summary of Contents for A2FE635CFJRU
