background image

GUIDE TO OPERATION

14

about 6 hrs

1 hr

1 hr

increase 1 C

increase 1 C

Comfortable Sleep

At night, before going to bed you can press down the SLEEP button on the
controller and the air-conditioner will run by the comfortable sleeping mode
to make you sleep more comfortable.

One hour after sleeping operation start, the temp. is 1 C higher than
the setting one. After another hour the temp. rises 1 C and then run
continuously for another 6hrs' and then close. The actual temp. is
higher than the setting one which is to prevent from being too cool
to your sleep.

In cooling, dehumiditying mode

Press SLEEP button once to make the air conditioner have the previous-set
sleep time (first power-on is "1h"), the sleep symbol will appear. Press time
button     /    , you can choose the time in 1~8 hours. Each press of     /    ,
the time increases/reduces 1 hour and "Xh" appears in the temperature
setting part, "OFF" appears in "TIMER OFF" display part and timer-off
time; press SLEEP button again to cancel sleep function, the sleep symbol
diappears.

One hour after start up, the temp. decrease 2 C lower than the
setting one. After another hour decrease by more 2 C.
The temperature will automatically rise by 1 C after another 3hrs'
o p e r a t i o n ,   a n d   t h e n   a u t o m a t i c a l l y   c l o s e   a f t e r   3 h r s '   c o n t i n u o u s
operation. The actral temperature is lower than the setting one which
is to prevent from being too hot to your sleep.

In heating mode

Note:
    In AUTO mode, unit will run in SLEEP function according to the operation mode.
    After setting SLEEP function, it is forbidden to calibrate clock.
    If the set sleep-time does not reach 8 hours, the unit will stop operation automatically after set
time is complete.
    Change "TIMER-OFF" first, then set SLEEP, and press the sleep-set-performance; set TIMER-
ON function first, the sleep function can only be set before TIMER-ON; if set theSLEEP function
first, the TIMER function can not be set.
    After setting SLEEP, press CLOCK button to show the time; press TEMP. button to show the
temperature; press again to change temperature.

TEMP

SWING

FAN

ON

OFF

MODE

SLEEP

SET

CLOCK

TIMER

LOCK

RESET

AM

SETTING T

SLEEP RUN BEGINS

SLEEP RUN STOPS

1 hr

1 hr

3 hrs

about 3 hrs

decrease 2 C

decreases 2 C

increase1 C

SHUT DOWN

SLEEP RUN STOPS

Heat  mode

SLEEP RUN BEGINS

SETTING T

SHUT DOWN

Cooling  mode

Summary of Contents for AC182ACABA























Reviews: