background image

Cautions

1

Disposal of the old air conditioner

Before disposing an old air conditioner
that goes out of use, please make sure it's
inoperative and safe. Unplug the air
conditioner in order to avoid the risk of
child entrapment.

It must be noticed that air conditioner
system contains refrigerants, which require
specialized waste disposal. The valuable
materials contained in a air conditioner can
be recycled. Contact your local waste
disposal center for proper disposal of an
old air conditioner and contact your local
authority or your dealer if you have any
question. Please ensure that the pipework
of your air conditioner does not get
damaged prior to being picked up by the
relevant waste disposal center, and
contribute to environmental awareness by
insisting on an appropriate, anti-pollution
method of disposal.

Disposal of the packaging of your new
air conditioner

All the packaging materials employed in
the package of your new air conditioner
may be disposed without any danger to the
environment.

The cardboard box may be broken or cut
into smaller pieces and given to a waste
paper disposal service. The wrapping bag
made of polyethylene and the polyethylene
foam pads  contain no fluorochloric
hydrocarbon.

Consult your local authorities for the name and
address of the waste materials collecting
centers and waste paper disposal services
nearest to your house.

Safety Instructions and Warnings

Before starting the air conditioner, read the
information given in the User's Guide
carefully. The User's Guide contains very
important observations relating to the
assembly, operation and maintenance of the
air conditioner.

The manufacturer does not accept
responsibility for any damages that may
arise due to non-observation of the following
instruction.

     Damaged air conditioners are not to be
put into operation. In case of doubt, consult
your supplier.

      Use of the air conditioner is to be carried
out in strict compliance with the relative
instructions set forth in the User's Guide.

     Installation shall be done by professional
people, don't install unit by yourself.

All these valuable materials may be taken to a
waste collecting center and used again after
adequate recycling.

   For the purpose of safety, the air
conditioner must be properly grounded in
accordance with specifications.

   Always remember to unplug the air
conditioner before opening inlet grill. Never
unplug your air conditioner by pulling on the
power cord. Always grip plug firmly and
pull straight out from the outlet.

Summary of Contents for AD072XLEAA



























Reviews: