background image

5

1. Applicable ambient temperature range:

The machine is adaptive in following situation

2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent

    or a similar qualified person.

3. If the fuse on PC board is broken please change it with the type of  T 3.15A /250VAC.

4. The wiring method should be in line with the local wiring standard.

5. The power cable and connecting cable are self-provided.

    The connecting cable should be H05RN-F 4G 0.75mm

2

.

    All the cables shall have got the European authentication certificate. During installa-

    tion, when the connecting cables break off, it must be assured that the grouding wire is

    the last one to be broken off.

6. The breaker of the air conditioner should be all-pole switch; and the distance between its

    two contacts should be no less 3mm.

7. The indoor unit installation height is at least 2.5m.

Safety Precautions

Cooling

Heating

Indoor

outdoor

Rated    Maximum   Minimum
  27              32               18
  19              23               14
  35              43               10
  24              26                6
  20              27               15
 14.5             --                --
   7               24                -7
   6               18                --

DB  C
WB  C
DB  C
WB  C

Indoor

outdoor

DB  C
WB  C

DB  C
WB  C

outdoor ambient temp.

operation mode

recommended fan speed

> 40

*

< 20

*

< -5

*

> 18

*

cooling

cooling

heating

heating

low

high

low

high

8. In order to obtain the Unit's best performances, the fan speed  is recommended according

    to the following conditions

.

Summary of Contents for AD282AHEAA

























Reviews: