Function introduction
Freezing storage temperature setup
Super cooling
Super freezing
Holiday function
Display control
Door open alarming
Over temperature alarm
Turning off the fridge storage compartment
Turning off the refrigerator
Fault indication
Press key A6 or A7 to set the freezer storage temperature. The freezer storage temperature cycles
from -14 to -26
. It will be confirmed automatically 5 seconds after the operation is finished or by
pressing any other key.
Select this function after you have put fresh food in the fridge storage compartment. Press key A3,
and this function is activated and the corresponding indicator illuminates. This function will
automatically deactivate when the temperature decreases to the required level. You can also
deactivate it by pressing key A3 again.
Select this function after you have put large amount of food in the freezer storage compartment.
Press key A8, this function is activated and the corresponding indicator illuminates. This function will
become inactive automatically after 24 hours. You can also deactivate it by pressing key A8 again.
Press key A2, corresponding indicator illuminates and the holiday function of the fridge storage
compartment is activated. It will operate at a relatively high temperature in Holiday mode. The fridge
storage temperature will be indicated as “-” (Please take out the fresh food in the refrigerator and
close the door before activating this function). Press key A2 again, and the corresponding indicator
goes off and the refrigerator comes into normal control.
The display screen will turn off automatically 1 minute after an operation is finished. It can be lit up by
opening the door or pressing any key. (Alarm does not light up the display screen)
When the refrigerator door is open for more than 3 minutes, the alarm indicator will flash and the
buzzer will sound 3 beeps every 30 seconds. The buzzer can be silenced by closing the door or
pressing key A9.
When the temperature in the freezer storage compartment rises to a certain value, the alarm indicator
will illuminate solid and the buzzer will sound 1 beep every second. The buzzer can be silenced when
the temperature in the freezer storage compartment drops to a specified level or key A9 is pressed.
Press and hold key A1 for 3 seconds, and the corresponding indicator will turn off and the fridge
storage compartment will be turned off while the freezer storage compartment operates normally. The
fridge storage temperature indication icon will also go off. Press and hold key A1 for 3 seconds again,
the corresponding indicator will illuminate, the fridge storage compartment will be turned on, and the
fridge storage temperature indication icon will recover.
Press and hold key A10 for 3 seconds, corresponding indicator will go off, the display panel will go off
and the refrigerator will stop operating.
Press and hold key A10 for 3 seconds again, corresponding indicator will light up, the display panel
will light up, and the refrigerator will start operating normally.
This function is not equivalent to turning off the power.
When E or F is displayed due to fault, the refrigerator can still refrigerate. Please contact professional
after-sales service personnel as soon as possible.
12
Function introduction
(3) Model: AFD631*
Control panel
A1
Switch on/off the fridge storage
compartment
A2
Menu key
A3
Temperature up
A4
Temperature down
A5
Confirmation key
A6
Power ON/OFF
B
Super cooling icon
C
Holiday function icon
D
Fridge storage temperature display
E
Fridge compartment indicating icon
F
Freezer compartment indicating icon
G
Alarm icon
H
Freezer storage temperature display
I
Super freezing icon
J
Icemaker icon (only on models with an
icemaker)
K
Water input time adjustment icon
(only on models with an icemaker)
Initial powering on
Freezer storage temperature setup
When the refrigerator is powered on for the first time, icon G will light. The fridge storage temperature
will be displayed as “-” due to high temperature inside. The freezer storage temperature will be
displayed as“- -” due to high temperature. The buzzer will beep. Press key A5, the buzzer will be
silenced and icon G will remain lit. After the temperature decreases to certain level, icon G will turn off
and the displayed temperatures of the fridge storage compartment and the freezer storage
compartment will become the ex-factory settings “5” and “-18” respectively.
Fridge storage temperature setup
Press key A2 until icon D flashes. Then, press key A3 or A4 to set the temperature. The refrigerating
storage temperature cycles from 1 to 8. After you have set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon D is accompanied by flashing of icon E
Press key A2 until icon H flashes. Then, press key A3 or A4 to set the temperature. The freezing
storage temperature cycles from -14 to -26. After you've set it to the desired value, press key A5 to
confirm.
Note: Flashing of icon H is accompanied by flashing of icon F
The brightness of D,E, H
icon will decrease to half automatically when the refrigerator is not being operated.
13
