background image

3

WARNING!

Carefully read the following information in order to operate the air conditioner correctly.

Below are listed three kinds of Safety Cautions and Suggestions.

INSTRUCTIONS: 

These information can ensure the correct operation of the machine.

Be sure to conform with the following important Safety Cautions.

The Safety Cautions should be at hand so that they can be checked at any  time when needed.

If the conditioner is transferred to the new user, this manual should be as well transferred to the new user.

Safety precautions

Otherwise the one will feel unpleasant

or harm ones' health.

If any abnormal phenomena is found (e. g.

smell of firing), please cut off the power

supply immediately, and contact the dealer

to find out the handling method.

In such case, to continue

using the conditioner will

damage the conditioner,

and may cause electrical

shock or fire hazard.

When need maintenance and repairment,

call dealer to handle it.

Incorrect mainten-

ance and repairment

may cause water

leak, electrical shock

and fire hazard.

switch

off

Please let the dealer be responsible for installing
the conditioner.

Incorrect installation may cause water leak, elec-

trical shock and fire hazard.

Don't put fingers or any other things into the

inlet/outlet and swing louver while the condi-

tioner is in operation.

Because the highspeed fan is very dangerous

and may cause injuries.

Call the dealer to take measures to prevent the

refrigerant from leaking.

If conditioner is installed in a small room, be sure

to take every measure in order to prevent suffoca-

tion accident even in case of refrigerant leakage.

When conditioner is deinstalled or reinstalled

dealer should be responsible for them.

Incorrect installation may cause water leaking,

electrical shock and fire hazard.

Don't blow the human body with the cooling

air too long, and don't let the room tempera-

ture decrease too low either.

WARNING!

Incorrect operations may result in severe consequences of death or serious injuries.

CAUTION!

Incorrect operations may result in injuries or machine damages; in some cases may
cause serious consequences.

Summary of Contents for AS072XVERA



































Reviews: