4
English
This refrigerator is for built-in use only. Before use, this product must be installed
properly.
Preparation Before Installing
First, clean product's surface with soft cloth, remove all protective coating and belt
covering the product.
1. Pull the upper drawer open. Refer to the illustrations below. Put both
dividers of
shelf on the same side. Lift the crisper up off the drawer.
2. Lift both sides of shelf off the bin cradle with two hands together until the shelf is
pulled out and rotate.
3. Take the upper shelf out of the upper compartment.
Note:
After completing these three steps please close the upper drawer to avoid
damage to your body by sliding out of drawers following installation.
Pre-Installation Instructions
