ENGLISH
5
FAMILIARIZE YOURSELF WITH THE CONTROLS
ON YOUR DEHUMIDIFIER.
Control Panel
Features:
1
Power
Press POWER once to turn the dehumidifier
ON and press POWER again to turn the
dehumidifier OFF.
2
Humidistat
This allows you to adjust the humidity in the air.
You can set the humidity to your desired level
by pressing and keys.
3
Timer
Your dehumidifier can be set to turn on and off
at pre-determined times. Pre-setting can be
programmed up to 24 hours in advance.
4
Two Fan Speeds
This key controls the fan speed. There are two
speed levels, LOW and HIGH.
5
Current Temp/Timer Set Display
When the dehumidifier is running, it displays
the current temperature. Press the timer key
to program the dehumidifier to turn on or off
automatically at a pre-determined time.
6
Current Humidity/Setting Humidity Display
Displays the current humidity level and adjusts
the humidity to a desired level.
Setting Humidity Range: 40%RH~70%RH
Display Humidity Range: (LO)30%RH~(HI)90%RH
7
Bucket Full Indicator
When the indicator light comes on, automatic
flow control stops the unit.
Turn the unit off by pressing the POWER key.
Check to see if the bucket is full. If so, empty it.
If bucket is not full and indicator light is on, the
bucket is not in the proper position. Remove
and reinstall it.
8
Auto Restart
Once the power is restored, after 3 minutes,
the unit begins to operate at its previous
operation setting depending on the humidity
conditions.
NOTE: Auto-Defrost Sensor (built in)
When the
temperature is 60°F or lower, ice may form on
the evaporator coils preventing the removal
of moisture. When this occurs, the controller
stops the compressor, but allows the fan to
continue running. When the ice is no longer
present, the compressor will restart.
High
Low
On
Off
Hr.
Current
humidity
Set
humidity
BUCKET FULL
Auto Restart
POWER
°F
SPEED
TIMER
Summary of Contents for DE45EJ
Page 27: ...27 Notes Notas ...
Page 28: ......
