Haier DTA-1518, Service Manual

14

 
STATIC CONVERGENCE ADJUSTMENT 

1.  Input a crosshatch signal. 
 
2.  Using 4-pole convergence magnets overlap the red 

and blue lines in the center of the screen (Fig. 1) and 
turn them to magenta (red/blue). 

 
3. Using 6-pole convergence magnets overlap the 

magenta (red/blue) and green lines in the center of the 
screen and turn them to white. 

 
4. Repeat 2 and 3 above, and make the best 

convergence. 

DYNAMIC CONVERGENCE ADJUSTMENT 

 
1.  Move the deflection yoke up and down and overlap 

lines in the periphery. (Fig. 2) 

 
2.  Move the deflection yoke left to right and overlap the 

lines in the periphery. (Fig. 3) 

 
3. Repeat 1 and 2 above, and make the best 

convergence. 

 
 
 
 
 
 
 
After adjustment, fix the wedge at the original position. 
Fasten the retainer screw of the deflection yoke. 
Fix the 6 magnets with glue. 

(FRONT VIEW) 

Fig. 1 

(FRONT VIEW) 
 

 RED    GREEN  BLUE 

 BLUE 

RED 

GREEN 

  GREEN 
                       

RED    

  BLUE 
 
 
 

BLUE   GREEN   RED

Fig.2

(FRONT VIEW) 

 
RED  GREEN  BLUE        BLUE  GREEN  RED 

RED 

GREEN 

BLUE 

 
BLUE 

GREEN 

                       
RED 

Fig. 3