background image

24

Your Haier ULT Freezer has a 3 year warranty on the compressors and 5 years parts
and labor on the rest of the unit.

Equipment and Instrument Service center.

The warranty card should be kept for future service work. Should you need service or
to inquire about your freezer, please use the warranty card to contact your local

Haier

Technical Service

1

The Haier ULT Freezer is equipped with microprocessor control and a
digital temperature display with a range of -10

to -86

. The normal

operation temperature range is -50

to -86

.

The unit has a number of standard protection functions. They include
compressor delay protection, low voltage booster, and high voltage
protection.

The refrigeration system for the unit features a balanced cascade
technology powered by low-temperature rated speciality compressor.

Innovative and integrated design of the door lock and handle provide
convenient application.

Advanced LED display on the freezer can display the cabinet
temperature, set point, ambient temperature and line voltage. It also
allows the user to set the high temperature alarm, low temperature alarm
and notifies the user that the unit has developed a failure through the
display.

Note: Technical data published in this manual are nominal. The actual
ULT performance may vary slightly due to continuous product
improvements.

Features of the Haier ULT Freezer

Summary of Contents for DW-86L288















Reviews: