Select proper program . The program indicator lights in 5 sec-
onds and the wash process starts.
OPERATION INSTRUCTIONS
C.Dish washing
1.Switch on the appliance.
Press the On/Off switch and the indicators for drying and stan-
dard wash illuminate.
2.Program selection
3.End of wash.
1) When a program with drying process is selected, the program
indicator stays on and the indicator for drying blinks. The buzzer
buzzes at the end of the drying process and the power switch is
turned off automatically.
2) When a program without drying process is selected, the buzzer
buzzes and the power switch is turned off automatically when
the program finishes.
4.Food containers drying
1) After washing is finished and the power switch is switched
off, open the door. Food containers will be dry in several
minutes.
Caution
Forbidden
Turn the tap off at the end of washing
program to prevent water leakage due
to high pressure.
Poorer cleanness
1.Do not let food containers lapped.
If too many food containers are put in, the lapped parts can not
be washed. If it is necessary to lap the containers, make sure
that water can spray direct to the inside of the containers.
2.Yellow or balck spots on food containers
When yellow or black spots are seen on food cantainers, it means
that more iron in the containers.
3.Check the following items:
1) Chopsticks and forks that protrude out too long will prevent
the spray from turning. If so, please rearrange them.
2) When the filter or the sprayer is blocked, clean them, please.
3) Please use special detergent.
4) Do not cover the washing container with food containers.
5) Remove hard matters adhering to the food containers.
The follows are not abnormal.
1.Water remains in the washing box.
After water is drained out, a certain amount of water remains
under the filter. The water will be drained out first in next
operation.
2.Water remains under the filter
Water or water drops often remain under the filter after opera-
tion due to different forms and different settings of food
containers.
3.Watermarks on cups
Watermarks ramaining on the surface of transparent glasses is
not because of uncompleted flushing out of detergent. The rea-
son is that the water contains mineral substance. Clean the
watermarks with a piece of cloth.
remained water
GB
KNMK