background image

3

Installation

EN

Positioning the appliance

Positioning the appliance in the desired location. The back should rest against the wall behind it, and the 
sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses 
that can be positioned to the right or the left to facilitate proper installation.

Levelling the appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the dishwasher, making 
it level. In any case, the appliance should not be inclined more than 2°. If the appliance is level, it will help 
ensure proper performance.

Cold water connection

Connect the water supply hose to a threaded 3/4 (gas) connec-
tor, making sure that it is fastened tightly in place (see fig.A).
If the water pipes are new or have not been used for an ex-
tended period of time, let the water run to make sure that the 
water  is  clear  and  free  of  impurities.  If  this  precaution  is  not 
taken, there is a risk that the water inletcan get blocked and 
damage the appliance.

fig. A

Warning

The appliance is to be connected to the water mains using new 
hosesets and that old hose-sets should not be reused.

Summary of Contents for DW12-PFE2-E





























Reviews: