English
English
18
17
2. Press “Auto-Dry Cycles” button to select a suitable full automatic cycle.
• The Normal program will be automatically selected after powering on. If
another full automatic program is desired, press “Auto-Dry Cycles” button until
corresponding indicator turns on.
• To select your desired settings, the “Custom” function should be chosen.
• The dryer can memorize programs defined by user and display the previous
program upon next application of this function.
Use details are as follows (Features may vary per model purchased):
After powering on, press “Auto-Dry Cycles” until ”Custom” status, then set
“Timed-Dry Cycles” to Timed Dry or Rack Dry and set status of other buttons.
Press “Start/Pause” button or after half a minute, the program defined by user will be
stored and will be directly displayed upon next use.
Note
: The“Sensor Dry Level” button will be inactive during use of “Custom” function
and “Touch Up” cycle.
3. Press “Sensor Dry Level” button to select a suitable drying level.
• After powering on, the clothes dryer automatically sets dryness at “very”, which
means a longer drying time. If other drying level is desired, press “Sensor Dry
Level” button to select.
4. Press “Temp” button to set a suitable drying temperature.
• After switching on, the dryer sets the corresponding temperature adapting to
different cycles selected. If other drying temperature is wanted, press “Temp”
button to enable such a selection. There are 4 available drying temperatures:
High, Medium, Low, and Air Dry.
Casual
Delicate
Touch Up
Custom
Normal
Heavy
Cotton
Bulky Items
Auto-Dry Cycles
Cycle Signal
Softer
Wrinkle Care
Off
Cycles
Normal
LED display
Indicates current program remaining time. Initial display time is 60 minutes.
This is subject to change depending on the moisture level in the dry load.
Temp
High
Sensor Dry Level
Very
Timed/Cycles
Auto-program
