CONNECT SERIES SERVICE MANUAL
60
ENGLISH
Maintenance
Model: AUH2436ZGDA
Fan and Motor Removal
Note: Be sure to isolate power before removing the fan.
Step
Picture
Work instruction
1. Remove the grill.
Use a screwdriver to unscrew the two
screws on the upper left and lower
right corners.
2. Remove the fan.
Use a wrench to remove the
specialized nut and gasket of the fan.
Note: Please keep the nut and gasket
safe after removing them from the fan.
3. Remove motor.
Use a screwdriver to unscrew the bolt
of motor.
Note: Motor wire should be first
removed from the electric box.
4. Install the motor.
Replace with a new motor. Then
tighten up the screw bolt.